3D-Printing DeFi

(3D-Printing) ~ DeFi Node

Printing an DeFi Node Case

Daniel Weissengruber
1 min read

You can find the Model on Github.

Final DeFi Node

Slicing

All parts were printed with 3 perimeters and the “Fast 0.2mm” Profile from Prusa-Slicer.

Only for the Mid Part a 5mm Brim was used.

Timelapse

Timelapse was recorded with the Octolapes Plugin of octopi. With an cheap Endoscope from Amazon, held in place by an 3D-Printed part.

Top

Airguide

Assembly

Was pretty easy, just had to clean the print(s) from exessive material if an brim was used.

Back to Posts